Description

• Linear slot diffusers model MLC are designed for variable air volume systems. They ensure a uniform blanket of air that adheres to ceiling even at low flow rates.
• Pattern controllers can be adjusted to adjust the air flow direction Right, Left or Down.
• MLC linear slot diffuser is available in three slot widths of 12.5mm, 20mm and 25mm with upto eight slots.
• MLCR return diffusers are similar to Model MLC but without pattern controllers.
• Factory-made mitered corners are accurately assembled and carefully finished for a smooth and unbroken corner treatment.
• Ideal for continuous length applications.

The following accessories are available with MLC Slot Diffusers

• Type H - Hit and miss volume control damper.
• Factory made plenums with inlets suitable for round flexible ducts.
• Alignment strip for joining multiple sections.
• Side end Flanges
• Factory installed blank offs for mitered corners and other pieces if required.

 

• As standard the Diffuser is supplied in Titus White Epoxy Powder Paint on frames and black on pattern controllers.
• Alternate Finishes are available on special request, at extra cost.

Construction

• Manufactured from high quality aluminum extrusions, in single section of 1800mm. Length greater than
• 1800mm are furnished in multiple sections.
• Maximum pattern controller length is 900mm.
• Hit and miss damper is supplied in steel painted black.
• Factory mounted plenum are made of Galvanised steel and supplied with or without acoustic lining.